We are a
leading manufacturer
of paint and wire products in the Philippines.
PureCoat Lacquer Sanding Sealer
Wood | Primers & Sealers
A nitrocellulose based lacquer primer specially formulated to give an excellent finish on any delicate and expensive woodwork, as it imparts good film characteristics, such as good sealing and hold out properties that requires less sanding.
Technical Specifications
COLOR: hazy yellow
APPEARANCE: clear liquid
VISCOSITY: 70 seconds minimum FC #4 at 28 °C
THEORETICAL DENSITY: 0.87 ± 0.02 kg/liter
THEORETICAL NVM BY WEIGHT: 18%
THEORETICAL COVERAGE: 20 m2/4 liter at 25microns DFT (excluding application variationand substrate porosity factors)
- to touch: 10-15 minutes
- tack free: 1⁄2-1 hour
- hard: 4-6 hours
Application
METHOD OF APPLICATION: spray
PAINTING SYSTEM: Mix 1 part by volume PC Premium Lacquer Sanding Sealer to 2 parts by volume PureCoat Premium Lacquer Thinner to approximately 11-14" FC #4. Sand the wooden surface until free from rough edges. Remove all sanding dust with clean cloth then hammer and punch off all nail heads. If wood filler or putty is used, allow it to dry thoroughly. Apply with stain (optional: for wood grain enhancement). Allow stain to dry then apply sanding sealer in a smooth and uniform coat. Prior to topcoat, lightly sand coated surface. Avoid over-sanding as this will remove sanding sealer and stain.
Surface Preparation
For maximum paint performance, surfaces to be painted must be dry and in sound condition, free from loose dirt, dust, oil, grease and other foreign matter. These conditions must be ensured before starting paint application.