We are a
leading manufacturer
of paint and wire products in the Philippines.
PureCoat Duratex Topcoat
concrete, wood | Topcoats
An acrylic solvent-based coating specially formulated to provide firm hard coating, low dirt pick up, excellent gloss and a water tight film for new and previously painted interior and exterior masonry, wood and fiber cement board. It may be tinted to any desired pastel colors.
Technical Specifications
COLOR: white
APPEARANCE: flat, semi-gloss and gloss
VISCOSITY: 75-85 KU at 28 °C
THEORETICAL DENSITY: 1.11 ± 0.02 kg/liter
THEORETICAL NVM BY WEIGHT: 51%
THEORETICAL COVERAGE: 30 m2/4 liter at 50 microns DFT (excluding application variation and substrate porosity factors)
- to touch: 15-30 minutes
- tack free: 30-60 minutes
- hard: 4-6 hours
Application
METHOD OF APPLICATION: spray; for brush or roller, no reduction is required or use as necessary only
PAINTING SYSTEM: For spray, reduce 1 part PureCoat Premium Duratex Topcoat Paint with 2 parts PureCoat Premium Duratex Reducer. For plain finish, apply with 1-2 coats of PureCoat Premium Duratex Penetrating Sealer on bare substrate. Let it dry, then prime surface with PureCoat Premium Duratex Primer. Putty surface imperfections with PureCoat Premium Duratex Cast. Spot prime areas with PureCoat Premium Duratex Primer then topcoat with PureCoat Premium Duratex Topcoat White. For textured finish, apply with 1-2 coats of PureCoat Premium Duratex Penetrating Sealer on bare substrate. Let it dry, then prime surface with PureCoat Premium Duratex Primer. Achieve textured finish by spray application of PureCoat Premium Duratex Cast using mortar gun. Finish with PureCoat Premium Duratex Topcoat White.
Surface Preparation
For maximum paint performance, surfaces to be painted must be dry and in sound condition, free from loose dirt, dust, oil, grease and other foreign matter. These conditions must be ensured before starting paint application.