We are a
leading manufacturer
of paint and wire products in the Philippines.
PureCoat Duratex Cast
concrete, wood | Putties & Fillers
An acrylic-solvent based coating intended for exterior masonry, wood and fiber cement board whenever textured finish is desired. It can also be used for puttying hairline cracks and repair minor surface imperfections.
Technical Specifications
COLOR: white
APPEARANCE: putty-like
VISCOSITY: 80,000-90,000 cps at 28 °C
THEORETICAL DENSITY: 1.53 ± 0.02 kg/liter
THEORETICAL NVM BY WEIGHT: 75%
THEORETICAL COVERAGE: 5-6 m2/4 liter at mediumtextured pattern, as putty 10-12 m2/4 liter(excluding application variation and substrateporosity factors)
- to touch: 15-30 minutes
- tack free: 30-60 minutes
- hard: 4-6 hours
Application
METHOD OF APPLICATION: spray using splatter gun for textured paint putty or palette knife for putty application
PAINTING SYSTEM: For plain surfaces, apply with 1-2 coats of PureCoat Premium Duratex Primer. Putty surface imperfections with PureCoat Premium Duratex Cast. Spot prime areas with putty with PureCoat Premium Duratex Primer then topcoat with PureCoat Premium Duratex Topcoat. For textured surfaces, apply with 1-2 coats of PureCoat Premium Duratex Primer. Achieve textured finish by spray application of PureCoat Premium Duratex Cast using mortar gun. Finish with PureCoat Premium Duratex Topcoat.
Surface Preparation
For maximum paint performance, surfaces to be painted must be dry and in sound condition, free from loose dirt, dust, oil, grease and other foreign matter. These conditions must be ensured before starting paint application.