We are a
leading manufacturer
of paint and wire products in the Philippines.
PureCoat Road Runner Thermoplastic Road Marking Paint
Concrete | Topcoats
A high-performance, 100% solid thermoplastic type of powder coating suitable for use as road marking in highways, bridges, and street constructions. It provides excellent adhesion, high reflectivity, slip resistance, strong crack resistance, weather resistance, and outstanding wear and abrasion resistance.
Technical Specifications
THEORETICAL COVERAGE: 4 kg/ m
- to touch: within 3 minutes
POT LIFE: 5 minutes
Application
METHOD OF APPLICATION:
PAINTING SYSTEM: Heat the material to 150 C in a pre-heater with adequate agitation until homogenous. Melted liquid paint shall be mixed sufficiently before pouring out or transferring to the application equipment. Then, automatically apply by dropping together with drop-on glass beads on road lines and /or other markings. The different thickness application of thermoplastic road lines will influence PURECOAT PREMIUM GLASS BEADS retention and wear resistance property. Retroreflectivity is best achieved if thickness of thermoplastic road line is at 1.8mm minimum NOTE: The melting temperature shall be properly controlled at 150 - 220C and be kept for over 5 minutes.
Surface Preparation
For maximum paint performance, surfaces to be painted must be in sound condition, free from loose dirt, dust, oil, grease, algae, mildew and other foreign matter. These conditions must be ensured before starting paint application.