We are a
leading manufacturer
of paint and wire products in the Philippines.
PureCoat Duratex Primer White
Concrete | Primers & Sealers
An acrylic solvent based coating specially formulated to provide adhesion on the surface and for forming a water tight film. It is ideally use for new and previously painted interior and exterior masonry, wood and fiber cement board.
Technical Specifications
COLOR: white
APPEARANCE: flat
VISCOSITY: 80-90 KU at 28 °C
THEORETICAL DENSITY: 1.17 ± 0.02 kg/liter
THEORETICAL NVM BY WEIGHT: 50%
THEORETICAL COVERAGE: 25-30 m2/4 liter at50 microns DFT (excluding applicationvariation and substrate porosity factors)
- to touch: 15-30 minutes
- tack free: 30-60 minutes
- hard: 4-6 hours
Application
METHOD OF APPLICATION: spray; for brush or roller, no reduction is required or use as necessary only.
PAINTING SYSTEM: For spray, reduce 1 part PureCoat Premium Duratex Primer White with 2 parts PureCoat Premium Duratex Reducer. For plain finish, apply with 1-2 coats of PureCoat Premium Duratex Primer White. Putty surface imperfections with PureCoat Premium Duratex Cast. Spot prime areas with putty with PureCoat Premium Duratex Primer White then topcoat with PureCoat Premium Duratex Topcoat. For textured finish, apply with 1 to 2 coats of PureCoat Premium Duratex Primer White. Achieve textured finish by spray application of PureCoat Premium Duratex Cast using mortar gun. Finish with PureCoat Premium Duratex Topcoat.
Surface Preparation
For maximum paint performance, surfaces to be painted must be dry and in sound condition, free from loose dirt, dust, oil, grease and other foreign matter. These conditions must be ensured before starting paint application.