We are a leading manufacturer
of paint and wire products in the Philippines.

Guilder Durafloor Epoxy Penetrating Sealer

Concrete | Primers & Sealers

A two-component clear base coating designed to prepare surfaces for succeeding coats. It seals and smoothens the surface of new and old concrete, wood and fiber cement board.

Technical Specifications

COLOR: clear solution

APPEARANCE: 85 minimum at 60 °C gloss meter

VISCOSITY: 12-14 seconds FC #4 at 28 °C


THEORETICAL COVERAGE: 20 m2/4 liter at 50microns DFT (excluding application variationand substrate porosity factors)

  • to touch: 1⁄2 to 1 hour
  • tack free: 4-6 hours
  • hard: 24 hours

POT LIFE: 8 hours

RECOAT: 16-24 hours


METHOD OF APPLICATION: spray; for brush or roller, no reduction is required or use as necessary only.

PAINTING SYSTEM: Mix 3 parts by volume Guilder DuraFloor Epoxy Penetrating Sealer to 1 part by volume Guilder DuraFloor Epoxy Penetrating Sealer Hardener. Allow 15 minutes induction time before application. Apply 1 coat of Guilder DuraFloor Epoxy Penetrating Sealer by brush or roller and let it dry for 24 hours. If necessary, putty surface imperfections with Guilder High Built Non-Sag Epoxy. Finish with one coat of Guilder DuraFloor Solventless Epoxy Floor Coating.

Surface Preparation

For maximum paint performance, surfaces to be painted must be dry and in sound condition, free from loose dirt, dust, oil, grease and other foreign matter. These conditions must be ensured before starting paint application.