We are a
leading manufacturer
of paint and wire products in the Philippines.
PureCoat Acrylic Latex Clear Gloss Emulsion
concrete, metal | Topcoats
It is a high performance water-based acrylic emulsion paint that dries to a clear, hard, glossy finish and protects previously painted and textured exterior walls. It is used as a sealer on concrete plasters when applied as first coat. It is recommended as a topcoat when a very high gloss finish is desired. It is also used as a protective coating for bricks, wash-out and other stones.
Technical Specifications
COLOR: milky white liquid
VISCOSITY: 50-55 KU at 28 °C
THEORETICAL DENSITY: 1.03 ± 0.02 kg/liter
THEORETICAL NVM BY WEIGHT: 31%
THEORETICAL COVERAGE: 20-25 m2/4 liter at50 microns DFT (excluding applicationvariation and substrate porosity factors)
- to touch: 1⁄2-1 hour
- tack free: 2-3 hours
- hard: 4-6 hours
Application
METHOD OF APPLICATION: brush, roller or spray
PAINTING SYSTEM: Apply at package consistency. If necessary, use a maximum of 1⁄4 liter clean water per 4-liter PureCoat Premium Acrylic Latex Clear Gloss Emulsion. For new surface, thoroughly cure concrete wall before painting. To reduce alkalinity, treat walls with PureCoat Premium Concrete Neutralizer. Apply one coat of PureCoat Premium Acrylic Latex Clear Gloss Emulsion by brush or roller. For old concrete, after the removal of old, loose paint and cleaning of surface, seal wall with one coat of PureCoat Premium Acrylic Latex Clear Gloss Emulsion by brush or roller. Prime wall with PureCoat Premium Wondercryl Acrylic Latex Masonry Flat White. Repair cracks and dents with PureCoat Premium Concrete Putty. Spot Prime repaired areas as necessary. Apply 2-3 coats of PureCoat Premium WonderCryl Acrylic Latex Masonry Paints.
Surface Preparation
For maximum paint performance, surfaces to be painted must be dry and in sound condition, free from loose dirt, dust, oil, grease and other foreign matter. These conditions must be ensured before starting paint application.