We are a
leading manufacturer
of paint and wire products in the Philippines.
PureCoat Skimcoat Ready-To-Use PS-3
Concrete | Construction Products
A single-component ready-to-use skimcoat based on a high-grade acrylic polymer. It is designed for interior and exterior concrete surfaces to smoothen imperfections and unevenness before painting. It eliminates plastering defects and water seepage, and bridges hairline cracks while providing superior adhesion, water and alkali resistance, and good workability and sanding properties.
Technical Specifications
THEORETICAL DENSITY: 1.72 ± 0.02 kg/liter
THEORETICAL NVM BY WEIGHT: 74%
THEORETICAL COVERAGE: 4-5 sq² / kilo at 0.3 to 3.00 mm coat (excluding application variation and substrate quality / porosity factors)
TO SAND: 30 minutes to 1 hour
Application
METHOD OF APPLICATION: Steel Cement Trowel
PAINTING SYSTEM: Using a clean steel cement trowel apply firmly one coat of Ready-To-Use Skimcoat concrete surface. Allow to dry thoroughly before applying another coat until the desired thickness is achieved. Application thickness is 0.3 to 3 mm. Applied surface should be dried for at least 30 minutes to an hour before sanding to further smoothen surface. Let dry for at least 24 hours prior to painting. No need to apply concrete neutralizer.
Surface Preparation
For maximum paint performance, surfaces to be painted must be in sound condition, free from loose dirt, dust, oil, grease, algae, mildew and other foreign matter. These conditions must be ensured before starting paint application.