We are a leading manufacturer
of paint and wire products in the Philippines.

Illinois Lacquer Sanding Sealer

Wood | Primers & Sealers

A nitrocellulose based lacquer primer specially formulated to give an excellent finish on any delicate and expensive woodwork, as it imparts good film characteristics, such as good sealing and hold out properties that requires less sanding.

Technical Specifications

COLOR: hazy yellow

APPEARANCE: clear liquid

VISCOSITY: 70 seconds minimum FC #4 at 28 °C

THEORETICAL DENSITY: 0.88 ± 0.02 kg/liter

THEORETICAL NVM BY WEIGHT: 18%

THEORETICAL COVERAGE: 22 m2/4 liter at 25microns DFT (excluding application variation andsubstrate porosity factors)

DRYING TIME:
  • to touch: 10-15 minutes
  • tack free: 1⁄2-1 hour
  • hard: 4-6 hours
Application

METHOD OF APPLICATION: spray

PAINTING SYSTEM: Mix 1 part by volume Illinois Lacquer Sanding Sealer to 2 parts by volume Illinois Lacquer Thinner to approximately 11-14" FC #4. Sand the wooden surface until free from rough edges. Remove all sanding dust with clean cloth then hammer and punch off all nail heads. If wood filler or putty is used, allow it to dry thoroughly. Apply with stain (optional: for wood grain enhancement). Allow stain to dry then apply Illinois Lacquer Sanding Sealer in a smooth and uniform coat. Prior to topcoat, lightly sand coated surface. Avoid over-sanding as this will remove sanding sealer and stain.

Surface Preparation

For maximum paint performance, surfaces to be painted must be dry and in sound condition, free from loose dirt, dust, oil, grease and other foreign matter. These conditions must be ensured before starting paint application.