We are a leading manufacturer
of paint and wire products in the Philippines.

Alkali-Resistant Concrete Sealer White

Concrete | Primers & Sealers

A high performance primer-sealer based on special acrylic emulsion polymer designed for high alkaline concrete and fresh green new concrete surfaces for a tougher and durable finish. It provides outstanding water, alkali and efflorescence resistance properties blocking water penetration and salt migration into the concrete surface. It completely seals surface to prevent paint defects and promote good adhesion. No concrete neutralizer is needed as preparation.

Technical Specifications

COLOR: white

APPEARANCE: flat

VISCOSITY: 105-110 KU at 28 °C

THEORETICAL DENSITY: 1.12 ± 0.02 kg/liter

THEORETICAL NVM BY WEIGHT: 54%

THEORETICAL COVERAGE: 25-30 m2/4 liter at 50 microns DFT (excluding application variation and substrate porosity factors)

DRYING TIME:
  • to touch: 15-30 minutes
  • tack free: 30-60 minutes
  • hard: 1-2 hours

RECOAT: 2-4 hours depending on weather condition

Application

METHOD OF APPLICATION: brush, roller or spray

PAINTING SYSTEM: If necessary, thin with a maximum of 1⁄2 pint of clean water per 4 liter paint. Apply 1-2 coats. Dries in 1⁄2 hour and may be recoated in 2-4 hours depending on weather condition. For best result, cure for at least 4 days prior to painting.

Surface Preparation

For maximum paint performance, surfaces to be painted must be dry and in sound condition, free from loose dirt, dust, oil, grease and other foreign matter. These conditions must be ensured before starting paint application.